8613580931980
duna@bltuv.com
akTwi
LED Cure Light Ɔyɛfo no!

 

Ergu Optoelectronics Technology Co., Limited yɛ UV optical manufacturer a ɛyɛ pɛpɛɛpɛ a wɔde sii hɔ wɔ afe 2011. Adwumakuw no yɛ ɔman mfiridwuma adwuma a ɛka R&D, adeyɛ, adetɔn ne nnwuma bom sɛ biako, ayɛ ne ho ama sɛ wɔbɛyɛ nhwehwɛmu na wɔayɛ UV akanea ahorow, UV ayaresa mfiri, UV reaction nhyehyɛe ne UV ayaresa nhyehyɛe.

 
  • UV LED Curing Nhyehyɛe
    UV LED Curing Nhyehyɛe
    UV LED curing nhyehyɛe no de UV LED hann fibea ahorow a asorɔkye tenten yɛ 365nm, 385nm, 395nm ne 405nm di dwuma de sa nneɛma a ɛyɛ hann ntɛmntɛm, ɛda adi sɛ ɛyɛ adwuma yiye, ahoɔden a wɔkora so, ɔhyew a ɛba fam ne nkwa nna tenten. Wɔde
    Kenkan pii
  • LED Curing Nhyehyɛe
    LED Curing Nhyehyɛe
    UVLED ayaresa nhyehyɛe no yɛ ɔkwan a wɔapaapae mu, a wobetumi ayɛ no sɛnea wɔpɛ{0}} sɛnea nneɛma a wɔyɛ no trɛw ne nea wɔhwehwɛ sɛ wɔyɛ no te. Nneɛma a ɛma onwini no bi ne mframa a ɛma onwini ne nsuo a ɛma onwini, na asorɔkye tenten a
    Kenkan pii
  • UV Glue Curing Nhyehyɛe a Wɔde Yɛ Adwuma
    UV Glue Curing Nhyehyɛe a Wɔde Yɛ Adwuma
    Wɔayɛ UVLED kanea a ɛyɛ adwuma yie no sɛ baako-kɔsi-abiɛsa, a ɛyɛ nea ɛda adi sɛ ɛyɛ adwuma a ɛba fam-na ne nkwa nna tenten paa. Wobetumi ayɛ asorɔkye tenten (365-405nm) ne ne kɛse sɛnea ɛbɛyɛ a ebetumi adi ahwehwɛde ahorow a ɛfa ayaresa
    Kenkan pii
  • UV LED Kanea a Wɔde Sa Aduru
    UV LED Kanea a Wɔde Sa Aduru
    UV LED curing light no wɔ hann-emitting area a ɛyɛ 400×400mm na ɛfa nsuo cooling mfiridwuma a ɛyɛ adwuma yie de hwɛ hu sɛ ɛyɛ adwuma a ɛyɛ den bere tenten-. Hann ahoɔden kyekyɛ a ɛyɛ pɛ, UV nneɛma ahorow a wɔde sa yare ntɛmntɛm,
    Kenkan pii
  • LED UV Curing Systems a wɔde tintim nhoma
    LED UV Curing Systems a wɔde tintim nhoma
    Nsu-cooled UV LED curing akanea, mfiridwuma a ɛho akokwaw, nsɛm dodow bi a edi mu, ne osuahu a ɛyɛ fɛ. Ɛboa customization a ɛyɛ mmerɛw, ɛne mfiri ahorow hyia, na hann fibea no nkwa nna boro nnɔnhwerew 20,000. Yɛde adwumayɛfo instɔlehyɛn
    Kenkan pii
  • Industrial UV Curing Kanea a Wɔde Yɛ Adwuma
    Industrial UV Curing Kanea a Wɔde Yɛ Adwuma
    Wɔayɛ saa drawer-type UV LED kanea ayaresa afiri yi titiriw ama nketewa-batch production ne laboratories. Ɛnyɛ den sɛ wɔde bedi dwuma na wɔasiesie sɛ wɔde bedi dwuma ntɛm ara. Wobetumi ayɛ parameters te sɛ kɛseɛ, asorɔkye tenten ne hann
    Kenkan pii
  • UV LED Spot Curing Nhyehyɛe
    UV LED Spot Curing Nhyehyɛe
    UV LED spot curing system, host betumi afa anan irradiation ti, spot diameter ne wavelength betumi ayɛ ahofadi apaw. Mfonini no kɛse yɛ ketewaa na ɛnyɛ den sɛ wɔde bɛka afiri a wɔde yɛ nneɛma a wɔde wɔn ankasa yɛ ho, na ɛtra hɔ bɛboro
    Kenkan pii
  • UV Spot Curing Nhyehyɛe a Wɔde Yɛ Adwuma
    UV Spot Curing Nhyehyɛe a Wɔde Yɛ Adwuma
    Wɔde touch screen a nyansa wom na ɛhwɛ UV spot curing nhyehyɛe no so, na ade titiriw no boa sɛnea irradiation ti 8 yɛ adwuma bere koro mu. Manual/automatic dual mode betumi ayɛ nea ahofadi wom. Nipadua a ɛyɛ ketewa no de nnwinnade ahorow a
    Kenkan pii
 

Nea Enti a Wopaw Yɛn

 

 

Ɛtrɛw Abisadeɛ
Wɔde nneɛma no di dwuma kɛse wɔ ɛlɛtrɔnik mfiri, LCD, semiconductor, coating, painting, printing, chemical industry(pharmacy, biology, lithium battery), nsu-treating, trenchless pipeline repairing, ne nea ɛkeka ho.

 

Yɛn Adansedi nkrataa
Yɛkura bɛyɛ 30 patents na yɛanya adansedie te sɛ ISO9001 ne CE a ɛhyia gyinapɛn ahodoɔ.

 

Yɛn Nnwuma a Yɛyɛ
Yɛhyehyɛɛ adwumayɛfoɔ mfiridwuma ho afotuo kuo wɔ ansa na-tɔn no. Kuw no mufo nyinaa wɔ nnwuma mu nimdeɛ a emu dɔ ne osuahu a ɛyɛ fɛ a ɛma wotumi bua adetɔfo nsɛmmisa ntɛm ara, na wobetumi de UV hann a wɔde sa yare ano aduru a wɔayɛ no sɛnea wɔpɛ a egyina nnwuma ahorow su, nneɛma a wɔyɛ ho nhyehyɛe a wɔhwehwɛ ne sikasɛm nhyehyɛe so ama.

 
Mfaso a ɛwɔ LED Cure Light so
 
01/

Mmere a Wɔde Sa Ayaresa Ntɛmntɛm
Halogen akanea a wɔde di dwuma wɔ amanne kwan so no betumi agye sikani 40 anaa nea ɛboro saa ansa na wɔasa resin a wɔabom ayɛ no yare, bere a LED akanea betumi anya nea efi mu ba koro no ara wɔ sikɔne 10 kosi 20 mu. Bere-korabea afã no ma nsensan ho aduruyɛfo tumi yɛ adwuma yiye, ɛtew bere a wɔde di dwuma wɔ ayarefo nkongua so na ɛma ayarefo dodow a wobetumi asa wɔn yare da biara da no yɛ kɛse.

02/

Ɔhyew a Wɔtew So
Amanne kwan so kanea a wɔde sa halogen yare no ma ɔhyew kɛse ba bere a wɔresa no yare no, na ebetumi ayɛ nea ɛnyɛ dɛ ama ayarefo na ebetumi asɛe ntini a atwa ho ahyia no. LED akanea a wɔde sa yare no mma ɔhyew a ɛba fam koraa, na ɛma adeyɛ no yɛ nea ahotɔ ne ahobammɔ wom ma ɔyarefo no. Saa ɔhyew a ɛso tew yi nso brɛ asiane a ɛwɔ oprehyɛn akyi nkate mu ase, na ɛma LED kanea a wɔde sa yare no yɛ nea ɔyarefo-adamfofa kwan so paw.

03/

Hann a Ɛde Ba a Ɛkɔ So Daa
LED curing akanea ma hann a ɛkɔ so daa na ɛyɛ den kɛse wɔ wɔn nkwa nna nyinaa mu. Halogen bɔlɔb a wɔde di dwuma wɔ amanne kwan so no taa sɛe bere a bere kɔ so no, na ɛma hann a ano yɛ den ne ne su so tew. Nea ɛne eyi bɔ abira no, LED akanea kɔ so yɛ adwuma, na ɛhwɛ hu sɛ wɔsa nsensan ho nneɛma bere nyinaa ma ɛyɛ nea ɛkorɔn sen biara.

04/

Ahoɔden a Wɔde Di Dwuma Yiye ne Nneɛma a Atwa Yɛn Ho Ahyia
LED curing akanea yɛ ahoɔden-a ɛmma ahoɔden pii, ɛgye ahoɔden a ɛba fam koraa sen atetesɛm curing akanea. Ahoɔden a wɔde di dwuma a ɛba fam no boa ma carbon footprint no sua, na ɛne sɛnea wosi nneɛma a ɛbɛkɔ so atra hɔ daa ne nneɛma a atwa yɛn ho ahyia ho asɛyɛde so dua kɛse no hyia.

05/

Nkwa Bere Tenten
Esiane nnɛyi mfiridwuma nti, LED kanea a wɔde sa yare no taa tra nkwa tenten bere a wɔde toto atetesɛm halogen bɔlɔb ahorow ho no. Bere a ebia ebehia sɛ wɔtaa sesa halogen bɔlɔb no, LED bɔlɔb betumi atra hɔ nnɔnhwerew mpempem pii. Saa nkwa tenten a ɛkɔ soro yi ma da biara da dwumadi ahorow no nsɛe pii na ɛka nyinaa so tew bere tenten.

06/

Pɛpɛɛpɛ ne Nkonimdi a Wɔakɔ anim
Nnɛyi LED akanea a wɔde sa yare no ma pɛpɛɛpɛyɛ ne tumi a ɛso bi nni ma wɔ ayaresa nhyehyɛe no so, na ɛma wonya nea eye sen biara a asiane kakraa bi na ɛwɔ hɔ sɛ ɛbɛsa yare boro - anaasɛ ɛba fam. Ɛdenam asorɔkye tenten a eye sen biara a wɔde wɔn ani si so pɛpɛɛpɛ so no, LED akanea a wɔde sa yare no ma ahoɔden a wɔsɛe no so tew na ɛtew asiane a ɛwɔ hɔ sɛ ɛbɛyɛ hyew dodo anaasɛ ɛbɛsa ntɛm no so, na ɛhwɛ hu sɛ wɔbɛyɛ polymerization nhyehyɛe a wɔahyɛ so na ɛkɔ so daa bere biara.

LED Cure Light a wɔde di dwuma
 

Nsõ a Wɔsan Yɛ
Wɔ nsensan ho ayaresa mu no, LED akanea a wɔde sa yare ho hia na ama wɔasa nneɛma a wɔde ahyɛ mu ma, nneɛma a wɔde siw ano, ne nneɛma a wɔde kyekyere nneɛma ho yare. Nea efi mu ba titiriw ne sanba a ɛtra hɔ kyɛ, a wɔbata so yiye a ɛtew nkongua bere so na ɛma ayarefo ahotɔ tu mpɔn. Ɛkame ayɛ sɛ mmofra a wɔfa wɔn sɛ wɔn mma no yɛ nea ɛwɔ hɔ nyinaa wɔ nnɛyi nsensan ho adwumayɛbea ahorow mu, na mfiri ahorow a etumi sa yare wɔ sikɔne 10 pɛ mu. Sɛ nhwɛso no, ayaresabea ahorow a wɔde LED akanea a ano yɛ den-di dwuma no bɔ amanneɛ sɛ nneɛma a wɔde yɛ adwuma no akɔ soro na ɛkyɛ a wɔde san yɛ no yiye.

 

Industrial Adhesive Curing a Wɔde Yɛ Adwuma
Wɔn a wɔyɛ no de LED akanea a wɔde sa yare di dwuma de nneɛma a wɔde nkata so sisi nhama a wɔde boaboa nneɛma ano mu ntɛmntɛm, titiriw wɔ ɛlɛtrɔnik ne kar adwumayɛbea ahorow mu. Sɛ wɔsa no ntɛmntɛm a, ɛtew nkotoku mu, na ɛma wotumi yɛ adwuma kɛse. Wɔde saa akanea yi sa UV-aduru a ɛyɛ mmerɛw, na ɛhwɛ hu sɛ ɛbɛkyekyere pɛpɛɛpɛ a ɛnsɛe nneɛma a ɛyɛ mmerɛw. Nnwuma nhwɛsoɔ bi ne ɛlɛtrɔnik nhyiamu nhama a LED curing ma adwumayɛ yɛ ntɛmntɛm kɔsi 50% sɛ wɔde toto atetesɛm akwan ho a.

 

Nneɛma a Wɔde Kata So ne Nneɛma a Wɔde Yɛ Nneɛma a Ɛwɔ Anim
Wɔde LED akanea a wɔde sa yare di dwuma kɛse de sa nneɛma a wɔde kata so, paint, ne aduru a wɔde sa yare wɔ nneɛma a wɔyɛ mu. Wɔma wotumi wie ntɛmntɛm, ɛtew ahoɔden a wɔde di dwuma so, na ɛma nneɛma a ɛwɔ soro no tumi kyɛ. Sɛ nhwɛso no, wɔn a wɔyɛ kar ne mfiri no de LED curing di dwuma de ma paint curing nhyehyɛe ahorow no yɛ ntɛmntɛm, na ɛtew cycle times so 30-40%. Nea efi mu ba ne sɛ wɔde wie a ɛyɛ mmerɛw a sintɔ kakraa bi na ɛwɔ mu.

UV Led Curing System

 

Led Curing System

Aduruyɛ Mfiri a Wɔyɛ
Wɔ akwahosan ho nhyehyɛe mu no, wɔde LED akanea a wɔde sa yare di dwuma de yɛ resins ne adhesives polymerize wɔ nnuruyɛ mfiri a wɔyɛ mu. Pɛpɛɛpɛ ne sterility ho hia, na LED mfiridwuma ma asorɔkye tenten a wɔahyɛ so a ɛma wotumi sa yare bere nyinaa. Sɛ nhwɛso no, wɔ nsensan a wɔde hyɛ nipadua mu anaa oprehyɛn nnwinnade a wɔyɛ mu no, LED ayaresa hwɛ hu sɛ nneɛma a ɛkorɔn-yɛ papa, a ɛtra hɔ kyɛ.

 

Ɛlektrɔnik ne Microfabrication
Wɔ ɛlɛtrɔnik mfiri mu no, wɔde LED curing lights di dwuma de sa ink a ɛma nsu fa mu, adhesives, ne encapsulants a ɛwɔ circuit boards so. Pɛpɛɛpɛ ne ahoɔhare a LED curing boa miniaturization ne complex designs. Adoption renya nkɔanim wɔ wearables ne IoT mfiri a wɔyɛ mu, baabi a ɛho hia sɛ wɔde sa yare ntɛmntɛm a ɛyɛ nketewa-. Nnwuma nhwɛsoɔ bi ne smartphone component assembly lines, baabi a LED curing ma throughput ne ahotosoɔ yɛ kɛseɛ.

 

Nnwuma a Wɔayɛ no Amanneɛbɔ

 

Yebetumi de UV LED ayaresa nhyehyɛe ne nnwinnade a ɛsono ne kɛse, asorɔkye tenten ne tumi a egyina wo adeyɛ tebea so ama de adi nneɛma ahorow a wɔyɛ no ho ahwehwɛde ahorow ho dwuma.


UV LED ayaresa nhyehyɛe no abɛyɛ nea wɔpɛ ma nnɛyi mfiridwuma mu ayaresa akwan a ɛyɛ adwuma a ɛda nsow ne anidaso a ɛtrɛw a wɔde di dwuma. Sɛ wopaw yɛn nneɛma a, ɛbɛma wo nneɛma a woyɛ no ayɛ adwuma yiye na ɛnyɛ nea atwa yɛn ho ahyia!

 

Ahwɛyiye a ɛsɛ sɛ wɔyɛ

 

 

Mfa afiri no nsi owia hann tẽẽ anaa mmeae a ɛhɔ yɛ hyew kɛse, na ɛhɔ yɛ nwini.
Mma nnhwɛ hann fibea no tẽẽ bere a afiri no reyɛ adwuma no, efisɛ ebetumi asɛe w’ani.
Mfa nsa a ɛyɛ nsu nka nnadewa kanea no na amma anyinam ahoɔden ankɔ mu.

 

Nneɛma a Wɔde Gu Nneɛma Mu Ho Nsɛm

Yɛbɛyɛ packing denam adwumayɛfo export packing,ahobammɔ tia breakage, awiei koraa no mu nnua cases / carton / pallet anaasɛ customized package.

 

productcate-554-228

 

FAQ

 

Asɛmmisa: So yebetumi ahwɛ video ne amanneɛbɔ a ɛfa mfiri sɔhwɛ ho ansa na yɛde amena?

A: Nokwarem no! Yɛbɛyɛ sɔhwɛ a edi mũ na yɛde sɔhwɛ video ne amanneɛbɔ no amena wo ma woasan ahwɛ mu ansa na wɔahyɛ afiri no ma. Sɛ wo si so dua sɛ biribiara ye a, afei yɛbɛtoa so de nneɛma akɔma.

Q: Ɔkwan bɛn so na wobɛpaw asorɔkye tenten a UV LED curing akanea?

A: Fa paw no gyina absorption su a ɛwɔ curing ade no so, twe adwene si asorɔkye tenten a wɔkamfo kyerɛ a ade a ɔde ma no de ama no so. Sɛ ɛho hia sɛ wosa nneɛma pii yare a, wubetumi apaw akanea a asorɔkye tenten pii wom anaasɛ wode bedi dwuma abom.

Asɛmmisa: Abusuabɔ bɛn na ɛda UV LED tumi ne ayaresa a etu mpɔn ntam?

A: Dodow a tumi no kɔ soro no, dodow no ara na hann no mu yɛ den na ɛyɛ ntɛmntɛm. Nanso, sɛ ɛkorɔn dodo a, ebetumi ama ade no ayɛ kɔkɔɔ anaasɛ ayɛ mmerɛw. Ɛho hia sɛ wogyina tebea pɔtee no so sɔ tumi a eye sen biara no hwɛ. Wubetumi de nhwɛsode ahorow ama yɛn ma yɛasɔ ahwɛ.

Asɛmmisa: Nneɛma bɛn na ɛka UVLED nkwa nna?

A: Bere tenten a wɔde di dwuma, nneɛma a atwa yɛn ho ahyia hyew (ɛfata kwan: 25-40℃), ɔhyew a wɔsɛe no adwumayɛ, nsakrae mpɛn dodow. Sɛ wɔtaa sesa anaasɛ ɔhyew a ɛkɔ soro a, ɛbɛma nkwa nna no ayɛ tiaa.

Asɛmmisa: Ɔkwan bɛn so na wobɛkɔ so akura UV LED nkwa nna mu?

A: Hwɛ nneɛma a atwa yɛn ho ahyia no hyew so, tew onwini nhyehyɛe no ho daa, tew switch ahorow a ɛho nhia so, fa UV ahoɔden mita susuw hann no ano den, na sɔ no bere ne bere mu bere a wɔmfa nni dwuma bere tenten no.

Yɛyɛ biako a edi kan manufacturers ne suppliers of LED ayaresa hann wɔ China, a ɛda adi denam nneɛma a ɛyɛ papa ne bo pa. Yɛsrɛ sɛ nya awerɛhyem sɛ wobɛtɔ LED ayaresa kanea a ne bo nyɛ den a wɔayɛ wɔ China wɔ ha na woanya quotation afi yɛn adwumayɛbea hɔ. Yɛgye nneɛma a wɔahyɛ da ayɛ nso.

Nneɛma a agye din .
Send Inquiry .
Customized Exclusive Curing Ano aduru
Professinal Team Wɔ Wo Som mu
di yɛn ho nkɔmmɔ